We are passionate about the beauty of interiors. We have sourced wonderful French products for your home from French companies who are as invested in the beauty & quality of their products as we are. Product designed & made in France - a wonderful point of difference & one we believe is worth supporting.
Made in France
Designed by Xavier Pauchard
Steel construction
Raw Varnished, Painted or Galvanised finish
Please contact us if you would like to purchase this product.
We can then advise availability from either current stock or upcoming deliveries. Please note that multiple heights are available (see below).
This product is subject to a 'Large Item' freight surcharge of an additional $8 per item.
Tolix 65cm Barstool
The Tolix Stool was designed by Xavier Pauchard, almost certainly in response to a request from a local firm (thought to be Schneider of Creusot), to provide a 'seat for every worker', thus the reason the Tolix Stool was available in multiple heights - to fit all the factory workers needs. The stool featured in the very first Tolix Catalogue in heights of 45, 50, 60 and 70cm.
Today the Tolix stool has increased its size range and is available from 45cm high to 80 cm high (in 5cm increments). Sizes available are: 45cm / 50cm / 55cm / 60cm / 65cm / 70cm / 75cm / 80cm.
The Barstools feature braces or footrests near the bottom of the legs. These feature on stool heights from 60cm up.
The Tolix Barstool looks amazing in the modern kitchen. Its clean simple lines sit comfortably with most kitchen designs. The raw varnished finish adds an industrial element to your space, but you can also choose from over 50 different colours, and add colour to your kitchen and family area.
To find out about the following read down the page or click on the link to go their directly.
To read about the History of Tolix go to the Tolix French Steel Furniture page >Click Here
What Height Barstool do I require?
Whilst every Kitchen and situation is different, the general norm is that for a standard height Kitchen Bench use, the Tolix 65cm Barstool is the required height. We do however recommend that you measure and check what height you require for your situation. Return to Top
Ordering & Custom Orders
Please note that as all Tolix furniture is made to order in France, production and shipping lead times can be lengthy.
Whilst this page features the Tolix 65cm Barstool, we can custom order any of the Tolix Stool sizes for you in any of the Tolix colours or finishes, so please contact us with your specific requirements and we can advise you of the timing for ordering and delivery. Return to Top
The Tolix 65cm Barstool is available in the following finishes:
RAW VARNISHED 65cm STOOL - Price $449
Raw steel with a transparent soft gloss varnish - for Interior Use
The Raw Varnished finish is timeless and gives the stool its industrial quality. This finish most reflects the age of the design and sits comfortably next to all surfaces. The Industrial finish is evidenced in the slight differences in color due to the variations in the original metal sheet. In addition the welds and joins used to assemble the chair can be seen under the varnish.
PAINTED 65cm STOOL - Price $449
Gloss paint finish - for Interior Use
The Tolix 65cm Barstool is available in approximately 50 paint colours. The bright glossy finish ranges from the sophistication of whites and creams, to fun reds, yellows, and ... The Painted finish is a great way to add energy and colour to a room.
The stools are fully painted using a mixed epoxy-polyester thermosetting paint.
GALVANISED VARNISHED 65cm STOOL - Price$614
Zinc coated steel with a transparent gloss varnish - for Exterior or Interior Use
Galvanized steel has gone through a chemical process to keep it from corroding or rusting. The steel gets coated in layers of zinc and then a clear varnish is applied.
When steel is submerged in melted zinc, the chemical reaction permanently bonds the zinc to the steel through the processing of galvanizing, and rust won't attack this protective metal. Zinc also protects the steel by acting as a "sacrificial layer." If, for some reason, rust does take hold on the surface of galvanized steel, the zinc will get corroded first.
GALVANISED NON VARNISHED 65cm STOOL - Price$579
Zinc coated steel (no varnish) - for Exterior or Interior Use
As per the Galvanised Varnished finish except there is no varnish applied. Return to Top
Barstool Features
Made in Burgundy France in the original factory - guaranteed authenticity
Steel construction for strength and durability
Multiple finishes and 50 colours available
Cross Brace under seat for added strength
Stackable for convenience
Cross Brace with rubber sleeves to protect the chairs when stacking
Height: 65cm
Seat size: 31cm x 31cm
Width at floor: 44cm x 44cm
Please note that up to 100 manual operations are involved in the production of each Tolix Barstool, and as such there may be slight variations in the above dimensions. Return to Top
